Product Features of the Single Phase Hybrid Solar Inverter
Engineered with an ultra-thin 165mm profile, this Single Phase Hybrid Solar Inverter leverages SiC technology to dramatically reduce thermal losses during continuous low-voltage regulation.
- SiC Technology Integration: Achieves a maximum efficiency of 98.2% and a European efficiency of 97.7%, significantly optimizing total AC output yields.
- Oversized PV Capacity: Handles 150% to 200% PV input power with 3 independent MPPTs (20A input current per MPPT), ensuring seamless compatibility with modern high-power PV panels.
- Dual Battery Ports: Features 2 independent battery connections (125A × 2) allowing the simultaneous mixed use of old and new battery banks without degrading cycle life.
- Exceptional Overload Tolerance: Delivers 166-400% overload capacity and handles 150-340% grid input power (up to 18kW) to supply loads and charge batteries in parallel.
- Smart Generator Routing: Incorporates an executive generator port equipped with smart monitoring to safely regulate a maximum generator input current of 82A.
Environmental & Operating Conditions
Built for highly demanding B2B deployments, the unit operates efficiently from -25°C to +60°C (initiating thermal derating above 45°C) and sustains performance at altitudes up to 4000m. The intelligent air cooling system maintains operational noise below 45dB(A) under a rigid IP65 ingress protection rating.
Standards Compliance & Safety
Integrating an isolation topology, the system meets stringent global codes including CE-LVD (IEC62109-1&2, IEC62477-1) and CE-EMC. Grid integration compliance includes VDE-AR-N 4105, EN 50549-1, G98/G100, and AS/NZS4777.2, featuring optional AFCI and PID protection modules.
